Marca: Spl

» Segnala ad un'amico

Disponibilità: Disponibile in 5 giorni

With the Transducer a dream comes true: you can play loud without being loud! The ultimate D. I. solution for guitar amps is the first full alternative to cabinet miking that really rocks.

Via headphones you can play inaudible while the Transducer delivers authentic sounds even of the finest nuances of your guitar amp. Pure, high-quality analog design produces the same load like a cabinet and guarantees direct response with latency-free processing.

You want to record your fully torqued tube amp in a hotel at night? You’ll stay. Everything goes in studio and home sessions, everwhere, everytime – and without a sound booth.

On stage all problems with loud cabs and complex mikings are avoided. The artist can play with in-ear-monitoring at moderate levels, and a perfect signal in recording quality is provided for the live mix!

 

In studio and on stage the Transducer replaces the guitar speaker cabinet and microphone(s) so that the time and resource-intensive microphone processing of this loud sonic source is no longer necessary. 

In addition the Transducer offers much more sonic flexibility and variety than a single mike and cabinet setup because it allows for varied speaker and mike simulations while allowing to retain accustomed features of individual setups (such as the ability to vary level-dependent loudspeaker characteristics and microphone distances).

 

 

The Transducer supplants at least four loudspeaker cabinets, two high quality microphones, their preamp, a good room ambiance, and at any time, the amplification may be cranked up.

The entire Transducer usage is highly intuitive and requires no miking expertise.

The Transducer offers a unique ability for the guitarist during production performance to hear a true playback and then adjust his playback to the moment in the control room.

Fully analog construction for the highest authenticity in sonic quality and outstanding playability throught direct, latency-free response.

Critical parts are carefully selected for exceptional sonic characteristics. In these days of mass production, we still select our OP amps only after listening to them and rejecting those lacking in our required exceptional sonic characteristics. This also applies to our top flight foil condensers and individually built High-Z transformers from renowned German manufacturer Lehle.

The Transducer replaces all major cabinet and microphone types, thereby enormous savings in cost and space in transport, on stage, or in the studio.

Processing is independent from absolute volume levels, which means that no recording room is necessary and ear-saving work is possible everywhere and at any time.

The Transducer is sonically much more flexible than a fixed cabinet/mike set in that all important loudspeaker and cabinet types, as well as dynamic and condenser microphones can be simulated.

Multiple guitar tracks can be “stacked” – the doubled layers become “phatter”. In the process, there will not be any thinning effect from phase shifts as with digital simulation.

200-Watt Power Soak: The power amp‘s distortion may, as with cabinets, be integrated into an authentically distorted sonic design.

Resulting recorded sounds are independent from room characteristics – what you hear is what you get.

Signals for live mixes are at recording quality level and free from crosstalk from other sound sources.

As on-stage recording loudspeakers are not needed any in-ear monitoring is done at safe-hearing levels as the cabinet must not be drowned out.

Significantly less time spent and much more efficiency and convenience in equipment setup, preparation, and working with sound variations.

Working procedures and connections follow customary standards of amp and cabinet sets.

Live application advantage: It is extremely easy to achieve a dry-wet-wet setup. The amp signal passes via “Speaker Thru“, for a dry direct signal and the Transducer line out is connected to the effects machine; FX left and right out provides a wet signal on stage.

Live application advantage: two line outs with separate balancing drivers – the Transducer provides for both FOH and stage routings

 

 

Features:

 

Outputs

Speaker Thru: 1/4" Jack connection

Pre Simulation Out: 1/4" Jack connection

Impedance ca. 1 kOhm

 

Mic Level Output

XLR, electronically balanced

Impedance unbalanced: ca. 600 Ohms

Impedance balanced: ca. 1,2 kOhms

Max. Output Level: +6 dBu

Signal to Noise Rati:o -100 dBu (A weighted)

 

Line Output 1

XLR, electronically balanced

Impedance: unbalanced ca. 600 Ohms

Impedance: balanced ca. 1,2 kOhms

Max. Output Level: +21,5 dBu

Signal to Noise Ratio: -94 dBu (A weighted)

 

Line Output 2

XLR and 1/4" TRS connection, electronically balanced

Impedance unbalanced: ca. 600 Ohms

Impedance balanced: ca. 1,2 kOhms

Max. Output Level: +21,5 dBu

Signal to Noise Ratio: -94 dBu (A weighted)

 

Power Supply

Selectable Line Voltages:

115 V AC, 60 Hz/ 230 V AC, 50 Hz

Power Consumption: 5,2 VA

Fuses:

110 – 120 V AC: 400 mA slow blow

220 – 240 V AC: 200 mA slow blow

Power Connector: Standard 3-prong IEC connector

 

Dimensions & Weight

Height x Width x Depth:

88,2 mm x 482,6 mm x 270 mm/ ca. 3,4" x 19" x 10,6" 

Weight: 4,8 kg/10,58 lbs