home page Home page Studio Equipment Studio Equipment Channel Strip Channel Strip Thermionic Culture Nightingale Thermionic Culture Nightingale

RICERCA PER MARCA

Thermionic Culture Nightingale

torna indietro torna indietro

Thermionic Culture Nightingale

Codice: 0-THCN
Disponibilità: Disponibile in 5 giorni
nuovo prodotto


€ 3.183,00
iva inclusa
Aggiungi al carrelloAggiungi al carrello
informazioni spedizioni | pagamento
Thermionic Culture Nightingale
Dettagli Thermionic Culture Nightingale
Descrizione

 

This is the second of Thermionic Culture half rack 4U units. These are of course all valve
Continuing with the 3-part principle (3 being the most powerful number in the universe) it consists of 3 parts:
 
2 x Mic amps with useful valve eq. Both have their own outputs (XLR unbalanced), which can give 20+dBu. These can be combined or taken individually into
1 x vari-mu compressor-based on The Phoenix but with a little more "attitude". The compressor section has its own input ("balanced" XLR) which can be selected instead of a feed from the mic amps, also an XLR "balanced" output capable of +25 dBu.
 
Uses:
 
Apart from the obvious 3 separate parts of 2 hi quality mic amps with eq + superb compressor additional uses are
 
As 2 mic inputs into the compressor for live or studio vocals
 
Using the Phase switch on 1 channel, combine 2 snare drum mics thru the compressor for really fat results
 
As you can take individual outputs, feed a signal thru 1 mic amp straight to mixing desk, also select the same mic amp output to the compressor & drive it, then feed the compressor output to another channel on the mixing desk & combine them. More variation of compression control!
 
THE NIGHTINGALE USES 5 VALVES
 
2 x ECC832 for mic amp/eq, 1 x 6AQ8, 1 x 5965 + 1 x 5726 in the compressor section.
 
Controls:
 
Mic Amp/eq
Input select (Mic Lo, Mic Hi, Line), Bass lift, Bass cut will give 2 positions of increasing bass shelving cut which interact with the bass lift to also give a variable mid cut overall. The Hi pass filter is purely for cutting very low problem frequencies. Top lift & cut, Presence, Gain, Hi pass filter, Phantom power (+48v). Note: Bass & Top lift controls use our Varislope curves which favour the extremes (40Hz & 10 kHz) when set high, which give heavy bass & glistening tops - unobtainable without valves. 
 
Compressor
Input select (Mic A, Mic B, A+B, direct Line), Gain, Threshold (4 steps), Release ( 3 way switch ), Output level (5 way switch)


Richiedi Informazioni

Per maggiori informazioni sul prodotto non esitare a contattarci tramite questo form



Nome e Cognome:
E-mail:
Informazioni: